U.S. Tsubaki Inc. - Super-H Series Chains

Super-H Series
Super-H Series Chain has the same wide waist as Super Series. The link plate thickness is identical to those of the ASME/ANSI Heavy Series roller chains. The same special manufacturing techniques used in Super Series Chain are used to produce the pitch holes. The pins are thru hardened. Because of this, Super-H Series Chain has an even higher Maximum Allowable Load than the Super Series.

Unit of Measure

Items	80HSUPERRB Super-H Series Chains	80HSUPERCB Super-H Series Chains	100HSUPERRB Super-H Series Chains	100HSUPERCB Super-H Series Chains	120HSUPERRB Super-H Series Chains
ANSI No.	N/A 80	N/A 80	N/A 100	N/A 100	N/A 120
Standard Type of Pin	N/A Riveted	N/A Cottered	N/A Riveted	N/A Cottered	N/A Riveted
Strand	N/A Single
P - Pitch	N/A 1.000 in	N/A 1.000 in	N/A 1.250 in	N/A 1.250 in	N/A 1.500 in
R - Roller Diameter	N/A 0.625 in	N/A 0.625 in	N/A 0.750 in	N/A 0.750 in	N/A 0.875 in
W - Width Between Roller Link Plates	N/A 0.625 in	N/A 0.625 in	N/A 0.750 in	N/A 0.750 in	N/A 1.000 in
T	N/A 0.156 in	N/A 0.156 in	N/A 0.187 in	N/A 0.187 in	N/A 0.219 in
H	N/A 0.949 in	N/A 0.949 in	N/A 1.185 in	N/A 1.185 in	N/A 1.425 in
h	N/A 0.819 in	N/A 0.819 in	N/A 1.024 in	N/A 1.024 in	N/A 1.228 in
D	N/A 0.312 in	N/A 0.312 in	N/A 0.375 in	N/A 0.375 in	N/A 0.437 in
L1	N/A 0.720 in	N/A 0.720 in	N/A 0.858 in	N/A 0.858 in	N/A 1.061 in
L2	N/A 0.823 in	N/A 0.823 in	N/A 0.965 in	N/A 0.965 in	N/A 1.203 in
C - Transverse Pitch	N/A 1.283 in	N/A 1.283 in	N/A 1.539 in	N/A 1.539 in	N/A 1.924 in
Average Tensile Strength	N/A 22000 lb	N/A 22000 lb	N/A 32600 lb	N/A 32600 lb	N/A 44000 lb
Maximum Allowable Load	N/A 4630 lb	N/A 4630 lb	N/A 7270 lb	N/A 7270 lb	N/A 9480 lb