To send your information to Tsubaki, press this button
- Does not damage conveyed materials
- Transfers materials smoothly to other lines
- Wide selection available in a variety of designs
- Easy to assemble and disassemble
- RT type Roller Table chain provides a low friction alternative to table top chain
- ST type Roller Table chain allows your product to be loaded and unloaded at right angles to the conveyor flow
- Standard sprockets can be used
Maximum allowable conveying load varies depending upon the width of the roller table and the machine length.
Please use sprockets that have more than 23 teeth.
The special attachment is bent to height of roller
Plastic roller (gray)
Stay pin (pin does not rotate)
Unit of Measure
Common Dimensions
P - Pitch |
N/A 0.625 in |
W - Width Between Roller Link Plates |
N/A 0.375 in |
R1 - Roller Diameter |
N/A 0.400 in |
h1 - Attachment Height |
N/A 0.280 in |
h2 - Link Plate Height |
N/A 0.335 in |
N - Attachment Width |
N/A 1.201 in |
T1 - Attachment Plate Thickness |
N/A 0.059 in |
T2 - Link Plate Thickness |
N/A 0.079 in |
d1 - Pin Diameter |
N/A 0.200 in |
R2 - Plastic Roller Diameter |
N/A 0.591 in |
L2 - Plastic Roller Length |
N/A 0.984 in |
Maximum Allowable Conveying Load |
N/A 72 lb/ft² |
